Heater control is simply carried out with use of our room thermostats. Note! EE18, EE24, EE30, EE36 & EE42 are convertible between 230V and 400V. Connection between several heaters is possible. Cable connections are to a 16 mm² terminal ( EE6 and EE10 to a 6mm² teminal) in the junction box at the end of the heater. However for the suspension of triple-element Energostrips we recommend the use of an accessory suspension frame.ĮnergoStrip has an unique construction which avoids the creation of electro magnetic fields (emission tested by SEMKO).ĮnergoStrip is approved for fixed installation by an authorised electrician. Energostrips can be suspended at any desired height on wires, chains etc. The heater should be fitted to the ceiling, see distance in adjacent table, using the standard ceiling brackets supplied. Three heating elements: EE18, EE24, EE30, EE36 & EE42 (Limited). EnergoStrip is approved in splash proof IP44 design for wet and dry areas.ĮnergoStrip is made of white powder coated galvanised sheet steel (except EE42 - uncoated) in three basic models. hot air.ĮnergoStrip can be mounted from 2m to 40m ceiling height and is suitable for a wide range of applications such as daycare centres, houses, schools, offices, churches, conservatories, showrooms, warehouses, factories, tennis and sport stadiums etc. This provides a natural, all over, comfortable heat without cold spots or draughts, with energy savings of 25 - 50% in comparison to conventional heating, i.e. That’s because the sun’s rays warm the atmosphere by heating solid objects.ĮnergoStrip works on the same principle. Lean against a wall on a cold morning once the sun is up and you’lI feel surprising warmth even though the temperature may still be several degrees below zero.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |